View STTH8R06R_1319513.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STTH8R06
Turbo 2 ultrafast high voltage rectifier
Main product characteristics
IF(AV) VRRM IRM (typ) Tj VF (typ) trr (max) 8A 600 V 5.5 A 175C 1.4 V 25 ns
K A A K K
TO-220AC STTH8R06D
K
TO-220FPAC STTH8R06FP
K
Features and benefits

Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses Package insulation voltage: TO-220AC Ins: 2500 VRMS TO-220FPAC: 2000 VDC
A NC A K NC
D2PAK STTH8R06G
I2PAK STTH8R06R
Description
The STTH8R06, which is using ST Turbo 2 600V technology, is specially suited as boost diode in continuous mode power factor corrections and hard switching conditions.
K
A
TO-220AC Insulated STTH8R06DIRG
Order codes
Part Number STTH8R06D STTH8R06FP STTH8R06R STTH8R06G STTH8R06G-TR STTH8R06DIRG Marking STTH8R06D STTH8R06FP STTH8R06R STTH8R06G STTH8R06G STTH8R06DI
August 2006
Rev 5
1/12
www.st.com 12
Characteristics
STTH8R06
1
Table 1.
Symbol VRRM IF(RMS)
Characteristics
Absolute ratings (limiting values)
Parameter Repetitive peak reverse voltage TO-220AC / TO-220FPAC / RMS forward voltage TO-220AC Ins. TO-220AC / D2PAK / I2PAK IF(AV) Average forward current = 0.5 TO-220FPAC TO-220AC Ins. IFSM Tstg Tj Surge non repetitive forward current Storage temperature range Maximum operating junction temperature Tc = 130 C Tc = 85 C Tc = 100 C tp = 10ms sinusoidal 80 -65 to + 175 175 A C C 8 A 24 D2 PAK / I PAK
2
Value 600 30
Unit V A
Table 2.
Symbol
Thermal resistance
Parameter TO-220AC / D2PAK / I2PAK Value (max) 2.2 4.6 3.8 C/W Unit
Rth(j-c)
Junction to case
TO-220FPAC TO-220AC Ins.
Table 3.
Symbol IR
Static electrical characteristics
Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 125 C Forward voltage drop Tj = 25 C Tj = 125 C VR = VRRM Min Typ Max 30 A 35 400 2.9 IF = 8 A V 1.4 1.8 Unit
VF
To evaluate the conduction losses use the following equation: P = 1.16 x IF(AV) + 0.08 IF2(RMS) Table 4.
Symbol trr IRM
Dynamic characteristics
Parameter Reverse recovery time Reverse recovery current VR = 400 V I =8A Tj = 125 C F dIF/dt = -200 A/s dIF/dt = 64 A/s IF = 8 A VFR = 1.1 x VFmax Tj = 25 C Test conditions IF = 0.5 A Irr = 0.25A IR =1 A IF = 1 A dIF/dt = -50 A/s VR = 30 V 5.5 0.3 150 150 5 Tj = 25C nC ns V Min Typ Max Unit 25 ns 45 7.2 A
S factor Softness factor Qrr tfr VFP Reverse recovery charges Forward recovery time Forward recovery voltage
2/12
STTH8R06
Characteristics
Figure 1.
P(W)
24 22 20 18 16 14 12 10 8 6 4 2 0 0
Conduction losses versus average current
Figure 2.
IFM(A)
100
Forward voltage drop versus forward current
= 0.05
= 0.1
= 0.2
90
= 0.5
Tj=125C (maximum values)
80 70
=1
Tj=125C (typical values)
60 50 40 30
Tj=125C (maximum values)
T
20 10
IF(AV)(A)
2 4 6
=tp/T
8
tp
0 10 0 1 2 3
VFM(V)
4 5 6 7
Figure 3.
Figure 4. Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC, I2PAK, D2PAK)
1.0 0.9 0.8 0.7 0.6 0.5 0.4
Relative variation of thermal impedance junction to case versus pulse duration (TO-220FPAC Insulated)
Zth(j-c)/Rth(j-c)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.E-03 1.E-02 1.E-01
Single pulse
Zth(j-c)/Rth(j-c)
0.3
T
T
0.2 0.1
Single pulse
tp(s)
=tp/T
tp
0.0 1.E+00 1.E-03 1.E-02
tp(s)
1.E-01
=tp/T
1.E+00
tp
1.E+01
Figure 5.
IRM(A)
22 20 18 16 14 12 10
VR=400V Tj=125C
Peak reverse recovery current versus dIF/dt (typical values)
Figure 6.
trr(ns)
120
Reverse recovery time versus dIF/dt (typical values)
VR=400V Tj=125C
IF=2 x IF(AV)
110 100
IF=IF(AV)
90 80
IF=0.5 x IF(AV)
70 60
IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV)
IF=0.25 x IF(AV)
50 40 30 20
8 6 4 2 0 0 200 400 600 800 1000
dIF/dt(A/s)
10 0 0 200
dIF/dt(A/s)
400 600 800 1000
3/12
Characteristics
STTH8R06
Figure 7.
Qrr(nC)
350
VR=400V Tj=125C
Reverse recovery charges versus dIF/dt (typical values)
Figure 8.
S factor
0.70 0.65 0.60
IF2 x IF(AV) VR=400V Tj=125C
Softness factor versus dIF/dt (typical values)
300
IF=2 x IF(AV)
250
IF=IF(AV)
0.55 0.50 0.45
200
IF=0.5 x IF(AV)
0.40 0.35 0.30
150 100 50
0.25 0.20
dIF/dt(A/s)
0 0 200 400 600 800 1000
0.15 0.10 0 200
dIF/dt(A/s)
400 600 800 1000
Figure 9.
Relative variations of dynamic parameters versus junction temperature
Figure 10. Transient peak forward voltage versus dIF/dt (typical values)
VFP(V)
12
2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 25 50 75 100 125
IRM
S factor
IF=IF(AV) VR=400V Reference: Tj=125C
11 10 9 8 7 6 5 4
IF=IF(AV) Tj=125C
QRR
3 2
Tj(C)
1 0 0 100
dIF/dt(A/s)
200 300 400 500
Figure 11. Forward recovery time versus dIF/dt (typical values)
tfr(ns)
160 140 120 100 80 60 40 20
IF=IF(AV) VFR=1.1 x VF max. Tj=125C
Figure 12. Junction capacitance versus reverse voltage applied (typical values)
C(pF)
100
F=1MHz VOSC=30mVRMS Tj=25C
dIF/dt(A/s)
0 0 100 200 300 400 500 10 1 10
VR(V)
100 1000
4/12
STTH8R06
Package information
Figure 13. Thermal resistance junction to ambient versus copper surface under tab (epoxy FR4, eCU = 35 m) (D2PAK)
Rth(j-a)(C/W)
70 60 50 40 30 20 10
S(Cu)(cm)
0 0 5 10 15 20 25 30 35 40
2
Package information

Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.8 Nm (TO-220FPAC) / 0.55 Nm (TO-220AC) Maximum torque value: 1.0 Nm (TO-220FPAC) / 0.70 Nm (TO-220AC)
5/12
Package information Table 5. TO-220AC dimensions
Dimensions Ref. Millimeters Min. A
H2 OI L5 L7 L6 L2 C A
STTH8R06
Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409
Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40
4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00
C D E F F1 G
F1
L9 L4 F
D
H2 L2 L4
16.40 typ. 13.00 2.65 15.25 6.20 3.50 14.00 2.95 15.75 6.60 3.93
0.645 typ. 0.511 0.104 0.600 0.244 0.137 0.551 0.116 0.620 0.259 0.154
M E
L5 L6
G
L7 L9 M Diam. I
2.6 typ. 3.75 3.85
0.102 typ. 0.147 0.151
6/12
STTH8R06 Table 6. TO-220FPAC Dimensions
Package information
Dimensions Ref. Millimeters Min. A
A H B
Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409
Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4
4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10
B D E
Dia
F
L6 L2 L3 L5 F1 L4 D L7
F1 G G1 H L2 L3
16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20
0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126
F G1 G
E
L4 L5 L6 L7 Dia.
7/12
Package information Table 7. TO-220AC (NIns. & Ins. 20-up) Dimensions
Dimensions Ref. Millimeters Min. A
B OI L F b2 C
STTH8R06
Inches Min. Typ. Max. 0.625 0.147
Typ.
Max.
15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 4.80 6.20 3.75
15.90 0.598
a1 a2 B b1
14.00 0.511 10.40 0.393 0.88 0.024 1.32 0.048 4.60 0.173 0.70 0.019 2.72 0.094 5.40 0.189 6.60 0.244 3.85 0.147
0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.212 0.259 0.151
A I4
b2 C
c2
a1 l2
c1 c2 e
a2
M b1 e c1
F OI I4 L l2 M
15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 2.60 2.95 0.104 1.70 0.044 0.102 0.116 0.066
8/12
STTH8R06 Table 8. I2PAK Dimensions
Package information
Dimensions Ref. Millimeters Min.
A E L2 c2
Inches Min. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.195 0.394 0.512 0.138 0.050 Max. 0.181 0.107 0.035 0.067 0.028 0.052 0.368 0.106 0.203 0.409 0.551 0.155 0.055
Max. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40
A A1 b b1
4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27
D
c c2
L1 L b1
A1
D e e1 E
b e e1
c
L L1 L2
9/12
Package information Table 9. D2PAK Dimensions
Dimensions Ref. Millimeters Min. A
A E L2 C2
STTH8R06
Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126
Max. 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20
4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40
A1 A2 B
D
L L3 A1 B2 B G A2 R
B2 C C2
C
D E G L
M
*
V2
L2 L3 M R V2
* FLAT ZONE NO LESS THAN 2mm
0.40 typ. 0 8
0.016 typ. 0 8
Figure 14. Footprint (dimensions in mm)
16.90
10.30 1.30
5.08
8.90
3.70
10/12
STTH8R06
Ordering information
3
Ordering information
Ordering type STTH8R06D STTH8R06G STTH8R066G-TR STTH8R06FP STTH8R06R STTH8R06DIRG Marking STTH8R06D STTH8R06G STTH8R06G STTH8R06FP STTH8R06R STTH8R06DI Package TO-220AC D PAK D2PAK TO-220FPAC I PAK TO-220AC Ins.
2 2
Weight 1.90 g 1.48 g 1.48 g 1.70 g 1.5 g 1.86 g
Base qty 50 50 1000 50 50 50
Delivery mode Tube Tube Tape and reel Tube Tube Tube
4
Revision history
Date May-2001 January-2002 18-Oct-2004 05-Dec-2004 10-Aug-2006 Revision 1 2 3 4 5 First issue D2PAK and I2PAK packages added TO-220AC Insulated package added D2PAK foot print correction Reformatted to current standard. Added package insulation voltage data on page 1. Changed order code STTH8R06DI to STTH8R06DIRG. Changes
11/12
STTH8R06
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
12/12

▲Up To Search▲

Price & Availability of STTH8R06R

	To Download STTH8R06R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .